Is this track system right for you?

Astro's 230 V track is a simple, slim system, but it isn't the best fit for every project. Here is how to tell.

It's a great fit if you want to:

• Keep the look clean. The track is slim and comes in black or white, so it blends into modern ceilings.
• Light a space flexibly. Spotlights clip on anywhere along the track, so you can move, add or remove lights as your needs change.
• Avoid extra equipment. It runs on 230 V, so there's no transformer to hide, power or replace.
• Build a custom shape. Straight runs, corners, T-junctions and crossovers are available. A closed loop, such as a rectangle, is possible with a Live Connector.
• Keep it simple. One power feed, standard 1 m and 2 m lengths, and a parts list that adds up as you design.

Think twice if you need:

• Separate lighting zones. All the lights on one track share a single circuit, so they switch and dim together. If you want zones controlled independently, you would need separate tracks, each on its own feed.
• More than 2,300 W on one feed. The configurator checks your total load. If you go over, you will need to split the design into more than one run with its own power.
• Several power points on one run. The track is fed from a single point. If your layout needs power to enter in more than one place, plan separate runs.
• A DIY install. The track is mains voltage, so it must be installed by a licensed electrician.
• Very long runs. The configurator limits a single run to 12 m, and anything beyond that needs a second run.

Not sure yet?

Build a design below and use Request a quote. We'll check the layout and power load with you before you buy.